Automatic Cookware Rotary Polishing Machine
Automatic rotary table polishing machines can have 2-3-4-5-6 and more stations for each individual polishing operation. The rotary table will turn the required angle, programmed by a PLC to have the next cookware product be polished by a turning polisher. Kitchenware products are mostly manufactured by a hydraulic deep drawing press, where the press forms a pot from a sheet made from stainless steel. This pot needs to have an edge cutting and trimming process by special machines called Edge Cutting Trimming Beading Curling Machines . Here the edges are cut and bent inside. After the Edge cutting process, pots are taken to the polishing for a mirror finish and a better outlook.
The rotary polishing machine has 2 main units, where there is one main rotary table in the middle, rotating for each operation and there are stationary units for polishing the pot’s outer surface The rotary polishing machine is controlled by a PLC, where the operator can arrange the rotation speed, operation duration, polishing parameters and etc.
After the mirror finish polishing, your pots will have such an end effect as seen on the photo above
For the original article, please visit: www.ems-metalworking.com