Cable powder coating machine

Cable powder coating machine

EMS Metalworking Machinery manufactures different models of electrostatic powder coating machines in cables to reduce the adherence of its cover and/or reduce the penetration and migration of water in power cables, optical fiber, coaxial and other cables. To facilitate the use of the different applications of each sector and cable, each model can be configured with different numbers of powder guns, as well as with optional features such as flow control and bascule or fixed cable pass. The control modules allow adjusting all the important parameters of the process such as quantity, frequency of application, and electrostatic charge. This ensures a constant uniform coating of the talc during the entire production process.

In the past, external powder refill containers were used for the automatic filling of the powder coating machines. The operator had to open a paper bag in order to carefully fill the powder into the refill container. Powder emissions and the associated contamination of the environment could not be avoided. Their newly designed powder refill container has the following advantage. The operator simply places the closed paper bag in the refill container. A corresponding lance is inserted from the outside into the powder sack, through which the powder is automatically conveyed to the powder coating machine if required. There are no more powder emissions; the environment remains free of powder contamination.

Cable powder coating machine

An even powdering of your cable will be ensured by the electrostatic charging of the powder with up to 100 kV, even at very high production speeds of up to 1500 m/min. Our patented filter-cleaning system ensures a dust-free production area, contamination by escaping powder is a thing of the past. A robust, powder-coated machine frame (welded construction), manufactured in-house, is used as the base frame.

Many Individual Extensions As the production conditions vary from customer to customer, we adapt each powder coater to the individual needs of each customer. Possible options are e.g: Powder application control to ensure the quality of your product Individual adaptation of the coating chamber depending on the task Fast, tool-free height adjustment of the coating chamber for perfect adaptation to different product center heights Freestanding coating chamber separated from the basic powder coater in difficult space conditions Fine dosing for the application of minimal powder quantities on the product Separate refill container for automatic refilling of the powder coating machine directly from the powder bag Integration of the powder coating system into a higher-level line control system with all common industrial bus systems In connection with a polishing station also suitable for graphite