Stainless steel kitchenware production line

Stainless steel kitchenware production line

With suitable working units and dies, the trimming and forming machine model EMS ECM 200 can perform a wide range of edge cutting and trimming operations on circular and polygonal flat or drawn sheet metal parts, in particular: Trimming: Trimming operation on round or polygonal edges of metal parts Flanging: Opening flanges on edges of drawn parts Turning: Fine turning of round parts Curling: Some parts need to have edges bend inside like a curl Beading: This is the deeper channel on the edges of round parts Threading for deformation: Open threads or tapping Seaming of covers The main strong points of EMS Metalworking trimming machines are: * Fast and simple to use, such as example the quick tool change feature and its user-friendly machine programming * Long tool life due to a sturdy construction of the working units with particular attention to the sliding both for “hydraulic” or “electronic” control of stroke by “brushless” motor and guiding by recirculating balls screws * Ability to find and develop solutions with a high degree of customization Usually EMS Metalworking edge cutters and trimmers are equipped with : * Lower spindle motorized by gear motor and inverter * Idle top spindle firmly connected to a boom structure * Working units: with hydraulic or electronic control of the stroke by "brushless" motor * Expansion/ejection system with hydraulic control coaxial to the lower spindle * Electrical panel complete with PLC and “touch screen” service panel for work sequence management * Safety devices: two-handed control button on swiveling console, safety guards at the side and at the rear of the machine; Safety light curtains in front of the machine (vertical and horizontal protection system)

EMS Metalworking Machines also produces: * Automatic scrap ejection * Automatic piece loading/unloading * Interfacing with external automation * Completes lines Description:  Hydraulic plant: mainly used for the clamping of the workpiece and for the control of any hydraulic working unit. The hydraulic plant has been installed into the machine for easy access and features.  Working units: the machine can support up to 3 working units (hydraulic and / or electronic control of the stroke by "brushless" motor;  Spindle: motorized through gear motor and inverter;  Worked platform: with “T” groves for guiding and clamping of working unit;  Piece clamping: the workpiece is clamped on the equipment with tailstock with hydraulic cylinder which is coaxial to the spindle (if provided); alternatively it is clamped directly on the spindle through an expansion equipment which is provided with easy construction interchangeable sectors.  Electrical panel: complete with PLC and “touch screen” service panel for work sequence management. Components of the best brands;  Safety devices: two‐handed control button on swivelling console, safety guards at the side and at the rear of the machine; Safety light curtains in front of the machine (vertical protection system);

Stainless steel kitchenware production line

www.ems-metalworking.com