Water Heater Heat Pump Boiler and Buffer Tank Production Machine
Product Description This Machine is used for Water Heater Heat Pump and Buffer Tank Production Machine | Boiler and Combi Tank Advantages 1. Efficiently 8-12s/pcs (Dia.XH:200mmX100mm），about 2500 pcs／8hours 2. Productions succeed ≧ 99% 3. Feedback by clients that machine frame life is over 20 years. 4. Easy maintenance. Semi-auto lubricate system 5. Easy operation. Unskilled ladies or freshmen can operate the machine 6. Three safe-protection systems
C.Max stroke limited sensor protects the main cylinder and workers Main Technical Parameters Size of Workpiece ≦Φ325MM*300MM(Dia.*H.) Thickness SS≦0.8MM, AL≦3MM Motor Power Workpiece motor:4KW*1 Edge cutting servo motor:1.5KW*1 Waste ring cutting servo motor: 1.5KW*1 Dimension 2150MM x 1200MM x 2000MM(L*W*H) Weight About 1 T
Machines produced in series or customized according to customer's requirements in order to perform the following operations: Trimming Inward/outward beading Inward/outward ribbing Inward/outward curling Inward/outward flanging Threading Lock-seaming with 3 or 5 container thicknesses on round and polygonal drawn parts or roll-bended cylinders. All EMS Metalworking Machinery trimming-beading machine models can be equipped with specific motorization according to the kind of machining to be performed and with working units driven by pneumatic-hydraulic, hydraulic, and/or brushless electric systems. This automatic cutting, trimming & beading machine is used to effectively cut/trim or bead the edge of stainless steel/aluminum cookware & utensils. These machines can also be adjusted to work in multiple operations:
1) Water Heater Heat Pump and Buffer Tank Production Machine | Boiler and Combi Tank edges can be cut or trimmed. 2) Water Heater Heat Pump and Buffer Tank Production Machine | Boiler and Combi Tank edge can be trimmed + beaded 3) Performing particular Water Heater Heat Pump and Buffer Tank Production Machine | Boiler and Combi Tank edge operation. Spinning forming machine ECM-100 Component Introduction * Function base with 3 hydraulic cylinders, two for vertical moving and one for horizontal moving * Independent operation screen for data sets * Using computer numerical control * There is one cylinder in the stand column, which presses the workpiece during working for more information www.ems-metalworking.com info@ems-metalworking.com